Enamel NTs-132 P available in ready to use, if necessary, for diluting solvent use 646. For painting facades use eco-friendly water-borne acrylic paint (VDAK) or silicone materials (enamel KO-174, organosilicate composition OS-12-03). Organosilicate composite OC-12-03 is used for protective and decorative weather-resistant paint outer surface of the concrete and concrete fencing and ground supporting structures (structures made of reinforced and precast concrete foundation piers and supports a contact network of railways, viaducts and tunnels, buildings and caps, etc.), construction of brick, stone for construction materials (ventilated facades, bricks, etc.). Organosilicate composition OS-12-03 – one component a weatherproof protective covering for a period bezremontnoy use of metal – 10-20 years old, concrete, concrete structures, facades of buildings and structures – at least 15 years. Application system for the composition does not require priming.
When the surface temperature of operation up to 100 C can be used such as a primer VL, GF, AK, FL (primer FL-03 K). Composition OS-12-03 after drying forms a nonflammable cleaner cover. Enamel KO-174 is designed to create a weatherproof decorative coatings products made of concrete, asbestos cement, and also for finishing exterior elements of buildings and structures. Most coatings are obtained by applying paint in multiple layers. The thickness of single layer coatings in the range 3-30 microns, multi – 300 um. In order to obtain protective coatings are used to apply an integrated multi-coating consisting of several layers of dissimilar paint, each layer performs a specific function. The first (lower) layer, consisting of a primer coating adhesion obespechiivaet to the surface of coated material and the decrease in the rate of electrochemical corrosion. The intermediate layer consists of filling, which is employed to align substrate. As a top, a topcoat, use a cover on the basis of the enamel, which gives the design decorative and protective properties. Adhesive strength attachment to the paintwork substrate, and hence its longevity, determines the quality of surface preparation. Metal surfaces are cleaned by hand or power tool, sanding, followed by degreasing.
