The Clean Company

The CLEAN COMPANY takes two high-quality anti-hologram test lamps in their product range through the cooperation with the customers order CLEAN COMPANY from two high-quality anti-hologram inspection lamps, lighting can Huber. The model type 80 is a portmanteau lamp type 150-1 a floor lamp to the nondestructive testing of surface of paint. The CLEAN System Center GmbH COMPANY has recorded with lighting, Starlight in her CLEAN PRODUCTS Division, the trade with professional cleaning, maintenance and repair systems, a new supplier, in its portfolio. Since 1990, the company of Johann Huber is specialist for lighting and light technology. We chose light technology Huber, because CLEAN PRODUCTS has the opportunity to be able to offer very high quality, developed in part with the industry at a high level anti-hologram test lamps for our customers”, says Mr Schontag, CEO of CLEAN COMPANY system headquarters. The two are now customers of CLEAN System Center GmbH COMPANY premium Anti-hologram type 150-1, testing equipment, a fixed appliance for comfortable work with two free hands and type 80, a suitcase lamp for mobile use locally available.

Mr Schontag and Mr Huber, owner of Starlight lighting technology, are convinced of a good and successful cooperation. CLEAN COMPANY System Center GmbH CLEAN PRODUCTS Division Stuttgarter str. 101 74074 Heilbronn contact: Rolf Schontag E-mail: FON: + 49 (0) 7131 568290 fax: + 49 (0) 7131 568292 NET: CLEAN PRODUCTS a division of CLEAN COMPANY System Center GmbH cleaning, care, and repair systems for the automotive market “striking another” for 21 years, CLEAN PRODUCTS, polishes – Paint Sealant – varnish – gloss finish – car shampoo protect – lambskins rims cleaner – engine cleaners – cleaners – glass cleaner – plastic care – Micro Fiber technology – FLEX polishing machines – polishing sponges – – pads – ex cent er polishers – Sanders deals Vacuum cleaner – odor neutralization machines – endoscopes – diagnostic equipment – air conditioning-cleaning machines – steam – adhesive technology – dent – workplace lighting – cleaning AIDS – Tornador – sprays – compressed air – tools – special products hologram test paint drying equipment accessories… If quality, fast and easy processing is important!

Jungmann System Technology

They look impressive, the huge, Wall-filling screens. It feels a bit like a spaceship on the command bridge. They look impressive, the huge, Wall-filling screens. For even more analysis, hear from technology investor. It feels a bit like a spaceship on the command bridge. Where was yesterday a chaotic mess of PCs and workstations, are today clearly structured big image systems.

Planned and carried out these were the specialists for control rooms of Jungmann system technology. Since 2001, Jungmann system technology (JST) is the company, when it comes to modernisation of control rooms and control rooms. Not only the ZDF entrusted their Studio Director premises the company Jungmann. Other renowned companies that are dependent on a properly functioning data center, gave this to the transformation of the company Jungmann. So, the Beck’s Brewery monitored the entire process of the brewing operation on 6 giant screens since the redesign by JST.

Together, these are more than six metres wide. For even more opinions, read materials from Clinton Family. Lufthansa also put on Jungmann and put their heart of the data center at Frankfurt airport, in the hands of the specialists. Out came clearly structured jobs, which guarantee a higher well-being of employees, as well as a higher efficiency. “Also Ulrich Baur, Director of the data center, is convinced that the new premises: with the consolidation of the areas we create overlooking our customers the basis for a process – and communication-optimal work environment in a room as well as a presentation enabled environment, which is on the cutting edge.” Basis for each refactoring is a photorealistic 3-d program, which developed the company itself. Using this program, each room can be redesigned in a very short time. Since then, confusing jobs belong to the past. JST places particular emphasis on clarity. When it comes to work in control rooms, an indispensable factor. JST designed not only big image systems with the latest LCD technology. The planning and execution of appropriate furniture and that developing software is on the agenda of JST. JST also involves unusual ways to teach the complicated technology to their customers. For some years there are in Frankfurt the first so-called Datacentermodell”a fully equipped model data center. Here, interested parties can try out advance once all functions of a data center. Not only an alarm scenario can be experienced live there. On the program are also testing a person sheath and the views of sophisticated monitoring systems. But this is not the only way to get to know the offer of JST. This year the JST community meeting a meeting of existing and interested customers of JST took place for the first time, meet to exchange experiences and to. Informative presentations on the subject of control rooms”in a relaxed lounge atmosphere were just one of the many points of the program. The event on a three-master in the port of Hamburg will be held next year. In addition to educational presentations, visitors expected so also an adventurous atmosphere. New customers and those interested in the topic of control rooms”are of course cordially invited, also in future have everything under control. More information can be found under.

Discopter Technology

Discopter (circular wing) technology identifies new propulsion for ships, aircraft, pumps, water turbines (turbine) n Discopter refers to a machine that creates a flow in gases or fluids (fluids), is a star of a center outwards. technology investor will undoubtedly add to your understanding. To create such a flow can be used for example radial impellers. Due to the rotation of the wheel, a vacuum is created in the Center, which draws the liquid or gas. A higher pressure to the outside wheel of the impeller, resulting in total this flow to the flow kind of wing, now flows to the circular wing the to the a ring is bent together. Due to the Special geometry of the circular wing, a buoyancy force (pressure) is created in the flow and the Diskopter is powered. 1.1 Discopter – product description of the Diskopter is a flying machine, that similar to a helicopter vertical take off and land can (VTOL vertical take-off and landing). In the current stage of development, he is unmanned (UAV unmanned aerial vehicle) and remote-controlled and can be compared with the construction of a helicopter, or exploit its control software available on the market.

In a helicopter, the force to the upgrade and the feed is generated by the spinning rotor blades. The principle is similar to an airplane wing. Propeller used also in the form of the propeller to drive ships, U messengers, diving robots, etc. Propeller drives have serious drawbacks that could not be solved by the previous global research and development work: risk of injury and risk of damage to human, animal, environment and the management system itself, through the rotating propeller blades and the flow pressure (example: helicopter landing) and a restricted range undesirable performance loss due to the emergence of air vortices on the wingtips and propeller-driven systems are a reduced efficiency difficult to control and require Therefore, complex and expensive sensors and control systems the optimum shape of the propeller is very difficult to calculate and must be determined in elaborate measurements of channel propeller in the water produce short-lived steam bubbles, which release energy at their disintegration, which destroy the propellers (cavitation).

Modern Technology

Light boxes are the appropriate presentation of your products of Cologne, 03.12.2009. Do you have a product that you want to promote? Or maybe you want to present your company at trade shows more outward. Useful light boxes have proved this. With these, the product or the thing, which is to be presented as a highlight, is literally illuminated and thus more striking! So that the products get the attention that meets them, there are a number of different models of light boxes, which are available at ALDISPLAYS. The range stretches from single-sided or double-sided illuminated light boxes that look like picture frames, light boxes with curved optics, to the beacon or a whole family of the lighting columns for the extraordinary eye-catcher.

Light boxes which are either double-sided illuminated and dominant hanging from the ceiling down provide individuality or single-sided illuminated wall-mounted be can. The different mounting options are possible also with the curved light boxes, where the advantage lies with these in their rounded shape that apart from simple light boxes. In addition to the modern light boxes for indoor use and the display window, there are outdoor light boxes, which attract the gaze of passers-by at ALDISPLAYS. The range includes the lightbox Flatlight, which the material protects it from vandalism and natural influences. ALDISPLAYS is constantly busy to expand the product range and to offer new models of light boxes. This is however not forget on the technique to create value. New in the assortment are the light boxes with LED light.

This modern technology reduces energy consumption by up to 70%. The very bright and even illumination of the boxes, with a guaranteed long LED life is particularly beneficial. The change of scene happens at the front and the model can be purchased on request in various color arrangements. More Information about the many different models of our light boxes, as well as its modern technology, on the site. We are looking forward to your visit!

Energy Efficient Technologies

Energy-efficient technologies power the business / all for one Midmarket AG scores again with suppliers of solar industry / contract about complete introduction of SAP in 6 countries Filderstadt, 22 October 2009 the markets for eco-friendly and energy-efficient technologies have sprung up. Drive solutions, machines and equipment, which produced not only efficient, but also in the operation, consume less energy and conserve resources, are on the rise. For the mechanical engineering and plant construction as for the automotive industry arise new market opportunities, reports Lars 903A k., CEO of the all for one Midmarket AG of the 4th German machine construction Summit on 13 and 14 October 2009 in Berlin. Where machinery and equipment manufacturers increasingly go into the solar technology or suppliers develop the photovoltaic industry as a new customer group, Komplettdienstleister all benefited also the SME specialist and SAP for one. With the recent order of Schletter GmbH in Kirchdorf/Haag (Oberbayern) on the introduction of the SAP Business all-in one solution scores the all for one Midmarket AG all for metal already to several times once again with companies belonging to the solar industry.

The corporate development of the alloy production specialists is typical for the dynamics of those markets. 2007: ground-breaking ceremony for a new manufacturing site in Kirchdorf in Haag in Oberbayern. 2008: Step across the pond with the founding of Schletter Inc. in Tucson, Arizona. 2008: completion and reference of the new manufacturing facilities. 2009: new orientation of IT, decision for SAP from the all for one Midmarket AG and start the complete introduction. Already for 2010 is the start of real operation in 6 countries of the Schletter group, in addition to Germany, the France, Greece, Spain, Italy and United States are planned and done in a first stage for 240 user. Schletter has a total 850 employees and recently achieved an annual turnover of EUR 140 million.